Request Information
  • Sanitary Shell & Tube Heat Exchangers

    Sanitary Shell & Tube Heat Exchangers

    Exergy sanitary shell & tube heat exchangers are designed to meet the high quality requirements and hygienic standards of the pharmaceutical industry. All product contact surfaces have a maximum surface finish of 20 µin (0.5 µm) Ra, and can be improved to 15 µin (0.4 µm) Ra or better with optional electropolishing. Available with single tubesheet or double tubesheet to eliminate risk of cross-contamination between the product and working fluids.

    Performance Features:

    • Heat transfer rates to 3,500,000 BTU/hr (1025 kW)
    • Liquid flows to 160 GPM (605 LPM)
    • Pressures up to 1,500 psi (104 bar)
    Design Features:
    • 316L SS, Hastelloy®, Inconel® and other alloys
    • Nickel brazed (no welds)
    • Fully drainable on tube side
    • ASME BPE sanitary fittings
    • ASME BPE compliant
    • Clean-in-place (CIP)
    • Available with or without electropolish
    • Material & process certifications included
    • Available with single or double tubesheet
    Typical Applications:
    • Point of use cooling or heating
    • Water for Injection (WFI)
    • Clean steam condensing and sub-cooling
    • Temperature control of high purity product
    • Product sampling

  • Shell & Tube Heat Exchangers

    Shell & Tube Heat Exchangers

    Exergy miniature shell & tube heat exchangers provide maximum performance in a minimum package. A unique compact arrangement of small diameter tubes results in a lightweight, cost effective design that is easily installed in space constrained areas.

    Performance Features:

    • Large heat transfer area in a small volume
    • Heat transfer rates to 3,500,000 BTU/hr (1025 kW)
    • Liquid flows to 160 GPM (605 LPM)
    • Pressures up to 1,500 psi (104 bar)
    Design Features:
    • 316L SS, Hastelloy®, Inconel® and other alloys
    • Nickel brazed (no welds)
    • NPT, tube stub, or custom fittings
    • Mounting kits available
    • Every unit pressure tested
    • Maintenance free
    Typical Applications:
    • Processing equipment
    • Condensing and evaporating
    • Regenerative heat transfer
    • Process fluid temperature control
    • Batch process cooling or heating
    • Cryogenic cooling
    • Sample cooling

  • Tube-In-Tube Heat Exchanger (Model # 00448)

    Tube-in-Tube Heat Exchangers

    Exergy tube-in-tube heat exchangers consist of two tubes, an inner and an outer coiled together. This unique, compact design prevents thermal fatigue, increases efficiency and reduces the overall size. It is ideal for high temperature, high pressure and low flow applications.

    Performance Features:

    • Heat transfer rates to 100,000 BTU/hr (29 kW)
    • Liquid flows to 10 GPM (38 LPM)
    • Pressures up to 4,500 psi (310 bar)
    Design Features:
    • 316L SS, Hastelloy®, Inconel® and other alloys
    • NPT, tube stubs, or custom fittings
    • Thick walled seamless tube
    • Integrated threaded holes for mounting
    • Highly resistant to thermal stress
    • All welded construction
    • Maintenance free
    Typical Applications:
    • High temperature, high pressure, low flow
    • Multi-phase fluids & slurries
    • High thermal stress
    • Steam condensing
    • Seal cooling
    • Liquid/Gas
    • Sampling
    • WFI

  • Sanitary Tube-in-Tube Heat Exchanger

    Sanitary Tube-in-Tube Heat Exchangers

    Exergy Sanitary tube-in-tube heat exchangers consist of two tubes, an inner and an outer coiled together. This unique, compact design prevents thermal fatigue, increases efficiency and reduces the overall size. It is ideal for high temperature, high pressure and low flow applications.

    They are designed to meet the high quality requirements and hygienic standards of the pharmaceutical industry. All product contact surfaces have a maximum surface finish of 20 µin (0.5 µm) Ra, and can be improved to 15 µin (0.5 µm) Ra or better with optional electropolishing. Our unique design ensures there is no risk of cross-contamination between the product and working fluids.

    Performance Features:

    • Heat transfer rates to 100,000 BTU/hr (29 kW)
    • Liquid flows to 10 GPM (38 LPM)
    • Pressures up to 4,500 psi (310 bar)
    Sanitary Features:
    • Available with or without electropolish
    • No risk of cross-contamination between fluids
    • Sanitary fittings ASME BPE
    • Material & process certifications included
    • Fully drainable on product side
    • Clean-in-place (CIP)
    • No dead spots or crevices
    • ASME BPE Compliant
    Design Features:
    • 316L SS, Hastelloy®, Inconel® and other alloys
    • NPT, tube stubs, or custom fittings
    • Thick walled seamless tube
    • Integrated threaded holes for mounting
    • Highly resistant to thermal stress
    • All welded construction
    • Maintenance free
    Typical Applications:
    • High temperature, high pressure, low flow
    • Multi-phase fluids & slurries
    • High thermal stress
    • Steam condensing
    • Seal cooling
    • Liquid/Gas
    • Sampling
    • WFI

  • Dimensional Drawing for Mounting Kits

    Mounting Kits

    (10)

    Exergy mounting kits allow for rigid attachment to your support structure. The mounting kit contains two stainless steel mounting clamps and the stainless steel hardware required for tapped or through-hole installation.